Sizing of multi-stage Op Amps by combining design equations with the gm/ID method

Analog integrated circuit design has as integral parts both analytical reasoning and numerical validation in the process from topology construction to sizing. Given a circuit topology, different circuit sizing results can be obtained from different processes of sizing inference. Sizing methods by simulation-based numerical searching have been a continuously studied subject. However, almost all approaches in this category require an overwhelming number of circuit simulations to arrive at an optimized sizing result. On the other hand, many published manual sizing methods by using the conventional device equations also require repeated SPICE simulations to correct the equation-based sizing results. This paper proposes a systematic gm/ID-based initial sizing method specifically customized for designing multiple-stage operational amplifiers (Op Amps). A main feature of the proposal is to use circuit-level design equations as constraints on the gm/ID table lookup method to substantially reduce the uncertainty in the sizing calculations. As a result, a significant amount of SPICE based correction work can be reduced to complete an initial sizing. The proposed sizing procedure includes a few regular sizing rules customized to the configuration of multi-stage Op Amps. We validate the proposed sizing method by application to several multi-stage Op Amp examples with a capacitive load or Miller compensation. Simulations have justified that the produced initial sizing results can achieve most of the prespecified design targets.     

Computer‐aided design methodology for linearity enhancement of multiwatt GaN HEMT amplifiers using multiple parallel devices

This article presents a design methodology for linearizing GaN HEMT amplifiers based on splitting a large FET into multiple parallel FETs with same total gate periphery and by biasing them individually. By varying the biases, the magnitude and the phase of the IMD3 components at the output of FET changes. A detailed simulation methodology using commercial microwave CAD software is presented. Simulation results show that by biasing one device in Class AB and other(s) in deep Class AB mode, IMD3 components of parallel FETs can be made out of phase to each other leading to cancellation and improvement in linearity. Three prototype circuits were simulated using (a) a single 5 mm FET (1 × 5 mm), (b) two parallel 2.5 mm FETs (2 × 2.5 mm), and (c) four parallel 1.25 mm FETs (4 × 1.25 mm), for a total gate periphery of 5 mm, over the frequency range of 0.8 to 1.0 GHz. IMD3 improvement up to 20 dBc was achieved with the 4 × 1.25 mm circuit when the FET biases were optimized. Measurement results show improvement in linearity up to 20 dBc for 4 × 1.25 mm circuit. The proposed method improves linearity without a substantial penalty on the power consumption and is straightforward to implement.     

Optimal design of Raman fibre amplifier based on terminal value optimization strategy and shuffled frog leaping algorithm

This paper introduces an evolutionary algorithm, Shuffled Frog Leaping Algorithm (SFLA), to solve the optimization problem in designing the multi-pumped Raman Fibre Amplifier (RFA). SFLA is a powerful optimizer tool because of its efficient mathematical expressions and global search capability. We utilize SFLA to determine the optimal pump wavelengths and pump powers by minimizing the gain ripple of RFA. To accelerate calculations, a terminal value optimization strategy (TVOS) is incorporated into the evolution of SFLA. This proposed strategy takes the terminal power values of pumps as the decision variables in optimization. Then, the optimal original power values of the pumps are obtained by solving the Power Coupled Equations once, without using the traditional method of repetitive guesses.The combination of SFLA and TVOS enhances the efficiency of optimization and accelerates calculation, while satisfying the design requirements of RFA.The simulation results show that nearly 65% of computational time has been saved compared with the traditional average power analysis. The 4-pumped C+L band of backward multi-pumped RFA with the average net gain of 0 dB, 1 dB and 2 dB are designed individually, where the gain ripple is less than 0.64 dB. The combination of SFLA and TVOS enhance the optimization efficiency and improve the performance of RFA with good gain profile.     

Recent activities in the field of Nuclear Operational Management and Nuclear Safety Engineering

Recent activities in the field of Nuclear Operational Management and Nuclear Safety Engineering, the studies related to risk analysis methodology, design, and operational management, physical phenomena, and emergency preparedness and nuclear security, have been progressed. Especially, ‘risk analysis methodology’ and ‘design and operational management’ are the main categories of the field, in which more than half of published articles on Journal of Nuclear Science and Technology are related to these categories.     

Looking into the TESSERACT: Time-drifts in event streams using series of evolving rolling averages of completion times

Business processes are dynamic and change due to diverse factors. While existing approaches aim to detect drifts in the process structure, Tesseract looks for temporal drifts in activity interim times. This orthogonal view on the process extends the traditional data cube of events – case id, activities and timestamps – by a fourth dimension and improves the operational support by a visualization of temporal drifts in real-time.Insights about temporal deviations lead to an augmented awareness of imminent failures or improved service times. The detection of related structural concept drifts can be improved by early warning, as operation times of critical parts often increase before they catastrophically fail.     

应用于车载激光雷达的宽带AGC跨阻放大器

针对车载激光雷达接收端脉冲信号脉宽窄、动态范围大等特点,提出了一种新型宽带、宽动态范围和高增益的自动增益控制(AGC)跨阻放大器。采用改进型调节型共源共栅结构作为输入级,拓展了带宽。使用改进型吉尔伯特单元作为可变增益放大器,进一步提高了带宽和增益。增加了AGC环路,提高了输入动态范围。基于标准 0.18 μm CMOS工艺进行设计与仿真,整体版图尺寸为760 μm×650 μm。仿真结果表明,该电路的-3 dB带宽为1.06 GHz,跨阻增益为80.79 dBΩ,输入动态范围为60 dB(1 μA~1 mA),功耗为47.6 mW,满足车载激光雷达接收机的要求。     

An Integrated Flexible All-Nanowire Infrared Sensing System with Record Photosensitivity

Infrared (IR) photodetectors are a key optoelectronic device and have thus attracted considerable research attention in recent years. Photosensitivity is an increasingly important device performance parameter for nanoscale photodetectors and image sensors, as it determines the ultimate imaging quality and contrast. However, photosensitivities of state-of-the-art low-dimensional nanostructure-based IR detectors are considerably low, limiting their practical applications. Herein, a biomimetic IR detection amplification (IRDA) system that boosts photosensitivity by several orders of magnitude by introducting nanowire field effect transistors (FETs), resulting in a peak photosensitivity of 7.6 × 10⁴ under an illumination of 1342 nm, is presented. Consequently, high-contrast imaging of IR light is obtained on the flexible IRDA arrays. The image information can be then trained and recognized by an artificial neural network for higher image-recognition efficiency. This work provides a new perspective for developing high-performance IR imaging systems, and is expected to undoubtedly enlighten future work on artificial intelligence and biorobotic systems.     

2.3–21 GHz broadband and high linearity distributed low noise amplifier

This paper focuses on the design of a 2.3–21 GHz Distributed Low Noise Amplifier (LNA) with low noise figure (NF), high gain (S₂₁), and high linearity (IIP3) for broadband applications. This distributed amplifier (DA) includes S/C/X/Ku/K-band, which makes it very suitable for heterodyne receivers. The proposed DA uses a 0.18 μm GaAs pHEMT process (OMMIC ED02AH) in cascade architecture with lines adaptation and equalization of phase velocity techniques, to absorb their parasitic capacitances into the gate and drain transmission lines in order to achieve wide bandwidth and to enhance gain and linearity. The proposed broadband DA achieved an excellent gain in the flatness of 13.5 ± 0.2 dB, a low noise figure of 3.44 ± 1.12 dB, and a small group delay variation of ±19.721 ps over the range of 2.3–21 GHz. The input and output reflection coefficients S₁₁ and S₂₂ are less than −10 dB. The input compression point (P_1dB) and input third-order intercept point (IIP3) are −1.5 dBm and 11.5 dBm, respectively at 13 GHz. The dissipated power is 282 mW and the core layout size is 2.2 × 0.8 mm².     

Optimal approximation of asymmetric type fractional-order bandpass Butterworth filter using decomposition technique

In this letter, the optimal rational approximation of fractional-order bandpass Butterworth filter (FOBBF) is presented. The transfer function of the FOBBF is decomposed into a multiplication of first-order and second-order terms. As a result, the design stability conditions can be easily satisfied using only the variable boundary constraints. The proposed technique generalizes the symmetric fractional-order roll-off characteristic as only a special case of the asymmetric one. Several examples are presented to validate the modeling efficacy.